© 2012-2019 Baylis Medical Company Inc. 18 of 48 DMR RFP-100A 3.3 V-13 29-May-2020_EN.docx
button. The FOOTSWITCH must be pressed and held in the READY state to deliver RF
energy and it must be released to terminate RF energy delivery.
(6) USB Connection (covered): Connection to be used by authorized service personnel only.
(7) Fan: A brushless DC fan is used to exhaust warm air from the Generator. The direction
of flow is outward from the rear panel.
(8) TUV Product Service (c-us) Mark Label
(9) Device Label: This label indicates the model number, serial number, and manufacturer
contact information. Symbols found on this label are described in Section 9.6.
To Next Page
Loading...