DS-RPC OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
36
Type "Y" to change the port select code,
followed by <cr>. The host module responds:
Enter Port Select Code (Max. 8 characters):
Enter a new port select code followed by
<cr>. For example, if you want to identify
the port select code as “BAYTECH,” type
BAYTECH followed by <cr>. The DS71 or
DS71-MD2 module displays the new port
select code and asks if you want to change.
Port Select Code is................BAYTECH
Change It? (Y/N):
If there are no additional changes, type "N"
for no, followed by <cr>. The DS71 or
DS71-MD2 module stores the new port select
code permanently in non-volatile memory and
returns to the configuration menu.
ATTENTION The Attention Character is a character used
CHARACTER in sequence to invoke the main menu.
Default Attention Character is a semicolon
(;).
From the configuration menu, select #5,
“Attention Character,” followed by <cr>.
The host module displays the current attention
character and asks if you want to change.
Attention Character is............ ;
Change It? (Y/N):
If you want to change the attention character
type “Y” for yes followed by <cr>”. The
DS71 or DS71-MD2 module responds:
Enter Attention Character:
To Next Page
Loading...
Need help?
General
