EasyManua.ls Logo

BayTech DS2-RPC DS4-RPC - RPC Operation and Configuration

Default Icon
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DS-RPC OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
56
Enter Dial-Up IP address in dotted decimal form:
Enter the Dial-Up IP Address (Example:
200.4.3.51), followed by <cr>. The
DS73TP resumes the configuration menu.
Default Dial-Up IP Address is 0.0.0.0.
If you fail to enter the Dial-Up IP Address in
dotted decimal form, the DS73TP responds
again:
Enter Dial-Up IP address in dotted decimal form:
The DS73TP responds indefinitely with the
same request until the Dial-Up IP Address in
entered in the correct form.
Subnet Mask The Subnet Mask is a bit mask that identifies
the network portion of the IP address,
allowing the DS73TP to determine whether
to send a packet directly to the client or to a
gate way. The Subnet Mask consist of four
bytes, each byte ranging from 0 to 255.
From the configuration menu, select #3,
“Subnet Mask,” followed by <cr>. The
DS73TP responds:
Enter Subnet Mask in dotted decimal form:
Enter the Subnet Mask (Example:
255.255.255.0), followed by <cr>. The
DS73TP resumes the configuration menu.
Default Subnet Mask is 0.0.0.0.

Table of Contents

Related product manuals