DS-RPC OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
67
1) . . . OUTLET 1
2) . . . OUTLET 2
3) . . . OUTLET 3
4) . . . Router 1
Enter Request:
To return to the DS-RPC > prompt, press
any key at the “Enter Request” prompt.
Enable/Disable When a command is sent to TURN ON,
Confirmation TURN OFF, OR REBOOT a receptacle, if
the enable/disable confirmation feature is
enabled, the DS-RPC responds, asking you
to confirm the command. For example, if
the command “ON 3” is sent, and the
enable/disable confirmation is enabled, the
DS-RPC responds:
Turn On Outlet 3? (Y/N)
If the enable/disable feature is disabled, the
DS-RPC will not ask to confirm the
command.
From the configuration menu, select #3,
“Enable/Disable Confirmation.”
Depending on the current status of the
switch, the DS-RPC responds with the
option to change the current status. Default
is Enabled.
Disable Confirmation? (Y/N)
Enable/Disable From the configuration menu, select #4,
Status Menu “Enable/Disable Status Menu.”
If the Enable/Disable Status Menu feature is
enabled, the following status menu appears.
Default setting is Enabled.
To Next Page
Loading...
Need help?
General
