EasyManuals Logo

BayTech DS2-RPC DS4-RPC User Manual

Default Icon
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
DS-RPC OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
54
DS73TP Ethernet Module
F.0.02 Copyright (C) 1997
Bay Technical Associates
Enter user name:
Enter the current user name; default user
name is user1. The module prompts for a
password:
Enter password:
Enter the current password; Default
Password is BTA. The following
configuration menu appears:
NOTE: User name and password are case sensitive.
Module IP Address: 200.4.3.72
Dial-up IP Address 200.4.3.73
Subnet Mask: 255.255.255.0
Gateway Addr: 200.4.3.1
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
Primary NBNS : 0.0.0.0
Secondary NBNS: 0.0.0.0
Ethernet Addr: 00.C0.48.1A.24.5D
Network Cable Connections: good
Module IP Address..............…..................................1
Dial-in IP Address..................…................................2
Subnet Mask..............................….............................3
Gateway........................................…..........................4
Primary DNS...................................….......................5
Secondary DNS.…..............................…....................6
Primary NBNS.....................................…....…...........7
Secondary NBNS...................................….................8
User Name................................................…...............9
Password.........................................................….......10
Module Name.....................................................…...11
Exit....................................................................….....X
Module The IP address is the network address
IP Address assigned by your network manager for your
network.The IP Address consist of four
bytes, each byte ranging from 0 to 255.
This parameter must be programmed
before the DS73TP accesses the network.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BayTech DS2-RPC DS4-RPC and is the answer not in the manual?

BayTech DS2-RPC DS4-RPC Specifications

General IconGeneral
BrandBayTech
ModelDS2-RPC DS4-RPC
CategorySwitch
LanguageEnglish

Related product manuals