DS-RPC OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
49
UNIT ID The unit ID (64 chars. max.) appears in the
DS-RPC module Main Menu and uniquely
identifies the unit. Default Unit ID is DS71
or DS71-MD2.
Select U, “Unit ID,” from the configuration
menu, followed by <cr>. The DS71 or
DS71-MD2 module displays the current
Unit ID and asks if you want to change:
Unit ID is ................................. DS71-MD2
Change It? (Y/N Change) :
Type “Y“ for yes followed by <cr>. The
DS71 or DS71-MD2 module responds:
Enter Unit ID (64 chars. max.) :
Enter the desired Unit ID, followed by <cr.>
The DS71 or DS71-MD2 stores the changes
in non-volatile memory and returns to the
configuration menu.
I/O MODULES RESET From the main menu, type “RM” to select
“I/O Modules Reset,” followed by <cr>.
The DS71 or DS71-MD2 module recycles
power to all I/O ports on all peripheral
modules and responds:
I/O Modules Reset Successfully
Strike any Key to Continue
UNIT RESET
IMPORTANT: Unit reset terminates both internal and external
modem connections.
NOTE: You must be connected to a host module (DS71 or DS71-
MD2 module) to reset the unit. Resetting the unit does not return
user selections to their default settings.
To Next Page
Loading...
Need help?
General
