EasyManua.ls Logo

BayTech DS2-RPC DS4-RPC - Controlling and Configuring Receptacles

Default Icon
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DS-RPC OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
57
If you fail to enter the Subnet Mask in
dotted decimal form, the DS73TP responds
again:
Enter Subnet Mask in dotted decimal form:
The DS73TP responds indefinitely with the
same request until the Subnet Mask is
entered in the correct form.
Gateway The Gateway is the address of a router for
connection to ther networks. The Gateway
address consists of four bytes, each byte
ranging from 0 to 255.
From the configuration menu, select #4,
“Gateway,” followed by <cr>. The DS73TP
responds:
Enter Gateway address in dotted decimal form:
Enter the Gateway address (Example:
200.4.5.50), followed by <cr>. The
DS73TP resumes the configuration menu.
Default Gateway address is 0.0.0.0.
If you fail to enter the Gateway address in
dotted decimal form, the DS73TP responds
again:
Enter Gateway address in dotted decimal form:
The DS73TP responds indefinitely with the
same request until the Gateway address is
entered in the correct form.
Primary From the configuration menu, select #5,
DNS “Primary DNS (Domain Name Server),”
followed by <cr>. The DS73TP responds:

Table of Contents

Related product manuals