DS-RPC OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
46
Rings to Configure the number of rings (1 - 4) for the
Answer modem to answer). For example, if the
rings to auto-answer are 3, the modem will
answer following the third ring. Default
Rings to Answer is 2.
Select #1, “Rings to Answer,” from the
Local Modem Setup menu, followed by
<cr>. The DS71-MD2 displays the current
setting for number of rings to auto-answer
and asks if you want to change:
Rings to Auto-Answer.......................2
Change It? (Y/N) :
Type “Y“ for yes followed by <cr>. The
DS71-MD2 responds:
Enter Number of Rings to Auto-Answer (1 to 4)
Enter the number of times you want the
modem to ring before it answers, followed
by <cr>. The DS71-MD2 stores the change
in non-volatile memory and returns to the
Local Modem Setup menu.
Modem to Modem to Modem Xon/Xoff is an ASCII
Modem Xon or Xoff character used by one modem
Xon/Xoff signaling the other to stop or resume
transmitting data. Default Modem to
Modem Xon/Xoff handshaking is
disabled.
Select #2, “Modem to Modem Xon/Xoff,”
from the Local Modem Setup menu,
followed by <cr>. The DS71-MD2 displays
the current Xon/Xoff status and asks if you
want to enable:
To Next Page
Loading...
Need help?
General
