DS-RPC OWNER’S MANUAL
REPACKAGING, SHIPPING AND RETURNING TO THE FACTORY
__________________________________________________________________________________________
71
REPACKAGING, SHIPPING AND RETURNING
TO THE FACTORY
If your Bay Tech equipment unit needs service, upgrade, or repair, return
it to BayTech. Before dismantling your equipment or before returning the
unit for any reason, always call BayTech. The user should never attempt
repairs on this unit. If you need to return the equipment to the factory for
repair, warranty work, or upgrade, follow the instructions below for
repackaging and shipping.
INSTRUCTIONS FOR REPACKAGING AND SHIPPING:
a. Call BayTech to get a Return Authorization Number.
IMPORTANT: Without this number, BayTech will not accept
returns.
b. Use the original packaging if available or choose a heavy
cardboard box.
c. Surround your unit with a minimum of two inches of
insulation.
d. Be sure to seal the box securely with strapping or packing
tape. We do not recommend masking tape or cellophane tape.
e. On the outside of the box, please write the Return Authorization
Number.
f. Ship the unit to the following address:
Bay Technical Associates, Inc.
200 N. Second Street
Bay St. Louis, MS 39520-1000, USA
To Next Page
Loading...
Need help?
General
