Need help?Do you have a question about the BayTech DS2-RPC DS4-RPC and is the answer not in the manual?
General| Input Voltage | 120V |
|---|---|
| Power over Ethernet (PoE) | No |
| Managed | Yes |
| Output Voltage | 120V |
| Protocols | SNMP, HTTP, Telnet |
| Ports | Ethernet |
| Mounting | Rack-mountable |
| Operating Temperature | 0°C to 40°C |
Steps for establishing serial connections using EIA-232, internal, and external modems.
How to interact with the DS-RPC via its main menu, select devices, and use ASCII commands.
Detailed guide for configuring DS71/DS71-MD2 serial port, device names, passwords, and other settings.
Procedures for configuring the DS74 peripheral module's serial port and device names.
Comprehensive setup for DS73TP, including IP addresses, subnet, gateway, and DNS.
Instructions for managing RPC receptacles and configuring RPC settings like passwords and names.
To Next Page