BCM MX610HD - Edp Voltage Selection (EDPPWR1); Connectors; Rear Panel Connectors

MX610HD User’s Manual
32 MX610HD User’s Manual
1.6.6 eDP voltage selection (EDPPWR1)
This jumper allows you to select 3V or 5V for eDP
+5V
+3V(defaut)
1
1
1.7 Connectors
1.7.1 Rear panel connectors
Item
Name
Function
Description
1
DC_IN
DC-in connector
The connector is for DC-in (12-24V)
2 USB USB 2.0
Connectors
These two Universal Serial Bus (USB) ports are
available for connecting USB 2.0 devices.
3
DP
Display Port
The display port Connector
4 HDMI HDMI Port The HDMI port Connector
5 LAN1 Gigabit LAN
(RJ-45)
Connectors
This port allows Gigabit connection to a Local
Area Network (LAN) through a network hub.
Refer to the table below for the LAN port LED
indications.
1
2
3
4
5
6
7
8
9