Beck IPC@CHIP Series User Manual

IPC@CHIP DK41 / DK51
Getting Started V2.2
© 2000-2004 Beck IPC GmbH Page 43 of 61
Now choose the CHIP.INI file on the IPC@CHIP and click “F4 Edit” to edit the file.
Paste the content of the Clipboard into the file after the IP section with CTRL+V.
Save the file and close the editor. In the dialog prompt that follows, you must then confirm that you
wish to upload the modified CHIP.INI file onto the IPC@CHIP. You then have to confirm that you wish
to overwrite the existing file.
You can close the FTP connection by clicking the “Disconnect” button once all files have been
transferred.
The DK50 must be restarted in order to activate the demo. To do this, press the Reset button.
After the IPC@CHIP has rebooted, reestablish the PPP-connection from your PC to the IPC@CHIP.

Beck IPC@CHIP Series Specifications

General

Brand	Beck
Model	IPC@CHIP Series
Category	Controller
Language	English