Beck IPC@CHIP Series - Step 5 - Operating the Demo Program

IPC@CHIP DK41 / DK51
Getting Started V2.2
© 2000-2004 Beck IPC GmbH Page 14 of 61
2.1.6 Step 5 – Operating the Demo program
Start your Internet browser and enter the IP address of your IPC@CHIP in the address bar. The start
page of the DK40 Online Demo will appear. Please choose the Java Applet example from the start
page. The security settings of your browser must allow the use of Java applets.
A Java applet is then loaded that visually represents the digital I/Os of the DK40. Click the fields
marked 7 to 0 in order to switch the outputs of the DK40 on and off.