To Next PageTo Next Page
Need help?Do you have a question about the Beck IPC SC123 and is the answer not in the manual?
General| Brand | Beck |
|---|---|
| Model | IPC SC123 |
| Category | Controller |
| Language | English |
Shows the physical pinout and layout of the SC1x3 package.
Describes pins for system interface, clock, bus control, and reset signals.
Explains chip select pins for memory and peripheral selection.
Details the shared functions and designations of the programmable I/O pins.
Explains how address pins are used for configuration during reset.
Describes the CPU's core components and operation.
Explains how the CPU addresses and organizes physical memory into segments.
Overview of accessing peripherals via the address and data bus.
Details USB 1.1 interface, operation, and pull-up/down resistor configurations.
Explains the power fail interrupt for saving non-volatile data.
Details reset behavior, including power-on and external reset.
Explains the watchdog timer function for system recovery.
Lists absolute maximum electrical ratings for SC123 and SC143.
Specifies recommended operating voltage and temperature ranges.
Lists detailed AC timing parameters for various signals.
Illustrates timing diagrams for the system bus operations.
Shows the timing diagram for the reset sequence.
Explains bus timing delays using the ARDY signal.
Shows minimum required external components for SC1x3 operation.
