IPC@CHIP SC123/SC143
Hardware Manual V1.06 [18.02.2010]
©2000-2008 BECK IPC GmbH Page 7
1 Overview
The IPC@CHIP® SC1X3 family is a combination of hardware and software including the preinstalled real time
operating system, TCP/IP stack, Web server, FTP server, Telnet server, enable designers to reduce the size, power
consumption, and cost of embedded systems, while increasing reliability, functionality, performance and time to
market.
The IPC@CHIP® SC1x3 family of System on Chip microcontrollers are embedded controllers that come with a 16-bit
186 processor and are designed to WEB- or LAN-enable products. The operating frequency is up to 96 MHz, the
package is a BGA-177 package.
The IPC@CHIP® SC1x3 family is the ideal solution for new designs requiring Ethernet TCP/IP communication over
twisted pair and/or through any serial interface. They come with an integrated 8MByte RAM and up to 8MByte FLASH,
thus reducing memory subsystem costs. The minimum endurance of the Flash memory is 100.000 write cycles
(depending on environmental stress e.g. temperature, used space and file size).
The IPC@CHIP® SC1X3 family microcontrollers also integrate the functions of the CPU, address bus, data bus, two
independent timers, watchdog timer, chip selects, interrupt controller, DMA controller, four asynchronous serial ports,
and programmable I/O pins on one chip. It also supports I²C-Bus and SPI (Serial Peripheral Interface). The USB
device interface supports user specific connections to standard USB hosts like PCs.
The IPC@CHIP® SC1X3 family is a highly integrated design that provides all Media Access Control (MAC) and
Encode-Decode (ENDEC) functions in accordance with the IEEE 802.3, 802.3u, and 802.3af standard. The integrated
10/100Base-T PHY makes IPC@CHIP® SC1X3 more cost-effective.
The IPC@CHIP® SC1X3 has been designed to meet the most common requirements of embedded products
developed for the communications, office automation, mass storage, and general embedded markets. Specific
applications would include industrial controls, data collection, protocol conversion, process monitoring and internet
connectivity.
As an option it can also be used in combination with an IEC61131-3 CoDeSys Run Time System.
To Next Page
Loading...
