IPC@CHIP DK41 / DK51
Getting Started V2.2
© 2000-2004 Beck IPC GmbH Page 49 of 61
3.2 IPC@CHIP @CHIP-RTOS
3.2.1 Updates
New @CHIP-RTOS versions for SC12 and SC13 are available for download via the Internet at the
download area of http://www.beck-ipc.com/ipc . The downloaded ZIP file contains complete @CHIP-
RTOS API
10
documentation in HTML format. Six different variant configurations of the @CHIP-RTOS
are included to tailor the @CHIP-RTOS to your needs.
Important:
Use an SC12 @CHIP-RTOS version exclusively on an IPC@CHIP SC12.
Use an SC13 @CHIP-RTOS version exclusively on an IPC@CHIP SC13.
Don’t mix up the targets!
The table below shows the different RTOS variants and their supported features.
Tiny Small Medium Medium PPP Large Large PPP
RTOS-Kernel x x x x x x
Serial port fossil driver x x x x x x
RTOS filesystem x x x x x x
External Disk Drive x x x x
XMODEM filetransfer x x x x x x
TCP/IP Ethernet driver x x x x x
TCP/IP PPP client/server x x
Ethernet packet interface x x x x x x
TCP/IP protocol stack x x x x x
I2C Interface x x x x x x
Software SPI x x x x x x
Hardware API x x x x x x
CFG server x x x x x
Web Server x x
FTP Server x x x x
Telnet Server x x x x
Please note:
Additional features of the @CHIP-RTOS (TFTP server, SNMP MIB support, Webfile upload,...) are not
a part of the six official @CHIP-RTOS variants, but customers can ask for a special @CHIP-RTOS
variant which includes the required features. Each @CHIP-RTOS variant with TCP/IP protocol stack
includes a DHCP client.
10
Application Programmer’s Interface
To Next Page
Loading...
Need help?
General
