Error handling and diagnostics
EL6752 91Version: 2.1
Error Description
Error during ADS/AMS data exchange
0x1120 Box parameters cannot be read
0x1121 Cdl parameters cannot be read
0x1122 DeleteBox or DeleteCdl only with AdsWrite
0x1123 ReadBox only possible in STOP state
0x1124 Incorrect IndexOffset at ReadBox
0x1125 Incorrect data length at ReadBox
0x1126 Incorrect IndexGroup at AdsRead
0x1127 AddDeviceNotification not allowed in INIT state
0x1128 DelDeviceNotification not allowed in INIT state
0x1129 IndexOffset too large during reading of the device diagnostic data
0x112B IndexOffset too large during reading of the box diagnostic data
0x112F Insufficient memory for ReadBox response
0x1201 AddCdl: CDL no. is too large
0x1202 DeleteCdl only possible when CDL is stopped
0x1203 DeleteCdl not possible as no CDL defined
0x1204 Cycle could not be completed within the internal watchdog time
0x1301 AddCdl: I/O access multiplier is too large
0x1302 AddCdl: Start cycle must be smaller than I/O access multiplier
0x1303 AddCdl: Incorrect data length for output area
0x1304 AddCdl: Incorrect data offset for output area
0x1305 AddCdl: Output area is already defined
0x1306 AddCdl: Incorrect data length for input area
0x1307 AddCdl: Incorrect data offset for input area
0x1308 AddCdl: Input area is already defined
0x1309 AddCdl: Incorrect area type
0x130A AddCdl: BoxNo has not been defined with AddBox
0x130B AddCdl: Incorrect action type
0x130C AddCdl: Insufficient memory for poll list
0x130D AddCdl: Insufficient memory for poll list array
0x130E AddCdl: Insufficient memory for actions
0x130F AddCdl: CdlNo already exists
To Next Page
Need help?
General
