© BEKA 201 All rights reserved!6
...a product of BEKA
4. Intended use
The central lubrication pump is approved for theonly industrial use.
Only operate the central lubrication pump if it is installed in/to another machine and operated
together with this. Only lubricants which comply with the machine manufacturer‘s specifications
may be conveyed. The central lubrication pump must only be used according to the technical data
(see chapter 1 „technical data“). Never exceed the mentioned values. Never operate the central
lubrication pump without lubricant.
Unauthorized changes not permittedof the central lubrication pump are . not liable for damages of machine orBEKAis
persons that result .thereof
Use according to the regulations also:means
· Observe all chapters and notes in the operating manual
· Carry out all maintenance worksing
· Observ work safety and accident preventionance of all regulations concerning during the life cycles of the device.
· Having the necessary professional training and authorization of your company to operate the device and to carry out
the necessary work.
Another use or a use beyond .this is deemed improper
5. Scope of warranty
Warranties regarding to operational safety, reliability and performance will only be granted by the manufacturer if the
device is used according to the regulations and under the following conditions.
· Assembly, connection and maintenance are carried out by professional staff.authorized
· The central lubrication pump is only used according to the operating manual.
· Never exceed the limit value indicated in the technical data.
· Modifications and repairs at the central lubrication pump may only be done by BEKA.
Guarantee and warranty for any damage at the device caused by improper lubricant (e.g. wear of
piston, piston jamming, blockades, brittled sealings etc.) will expire
BEKA will generally not assume guaranty claims for any damage caused by lubricants, although
those have been laboratory tested and released by BEKA, as such damage (e.g. by over-stored or
incorrectly stored lubricants, batch fluctuations, etc.) cannot be verified or reconstructed later.
Attention!
Attention!
Attention!
10
To Next Page
Loading...
Need help?
General
