Installation GRS105/GRS106
Release
01
11/2021
57
11 Monitoring the ambient humidity
Exclusively operate the device within the specified ambient humidity range.
See “General technical data” on page 61.
The humidity in the device is measured by an internal humidity sensor. The
measurements of the sensor may vary depending on the installation
conditions of the device, for example the distance from other devices or other
objects, and the thermal output of neighboring devices.
The measured humidity is displayed in the CLI and the GUI of the device. The
measured humidity is a guideline that indicates to you whether the rated
humidity thresholds were reached or possibly have been exceeded.
For more information refer to the software user manuals. You can download
these manuals as PDF files from the Internet on the Hirschmann product
pages (https://www.doc.hirschmann.com).
To Next Page
Loading...
