Belden Hirschmann OCTOPUS 8TX PoE-EEC - Configuration Readout

Installation OCTOPUS 8TX-EEC
Release 07 01/2021
41
2.6.1 Configuration readout
Perform the following steps to start up the device:
 Connect the storage medium to your PC using the M12 USB Adapter.
 Create a text file in the root directory of the storage medium.
 Rename the text file to “ShowRunningConfiguration.txt”.
 Disconnect the storage medium from the M12 USB Adapter.
 Connect the storage medium to the device.
 Restart the device by disconnecting the power supply for a moment.
 When the text file “ShowRunningConfiguration.txt” in the root directory
of the device is found, the device creates a file with the current
configuration.
 You will find this file in the root directory of the storage medium under the
name “Running_Config.txt”.