56
Installation OCTOPUS 8TX-EEC
Release
07
01/2021
9 Underlying technical standards
The device has an approval based on a specific standard exclusively if the
approval indicator appears on the device casing.
The device generally fulfills the technical standards named in their current
versions.
Name
FCC 47 CFR Part 15 Code of Federal Regulations
UL/IEC 61010-2-201 Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 2-201: Particular requirements
for control equipment.
ISA-12.12.01 Nonincendive Electrical Equipment for Use in Class I and II,
Division 2 and Class III, Divisions 1 and 2 Hazardous
(Classified) Locations.
RCM Australian Regulatory Compliance Mark (RCM)
Australian Radiocommunications Standard 2008,
Radiocommunications Act 1992
ECE Regulation No. 10,
Amendment No. 05, suppl. 01
E type approval for use in vehicles (EMC)
ECE Regulation No. 118,
Amendment No. 03, suppl. 01
E type approval for use in vehicles (burning behaviour)
EN 45545-2 Railway applications - Fire protection on railway vehicles - Part
2: Requirements for fire behavior of materials and components.
EN 50121-4 Railway applications – EMC – Emission and immunity of the
signaling and telecommunications apparatus (Rail Trackside)
EN 50155 Railway applications - Electronic equipment used on rolling
stock
EN 55032 Electromagnetic compatibility of multimedia equipment –
Emission Requirements
EN 60950-1 Information technology equipment – Safety – Part 1: General
requirements
EN 61131-2 Programmable controllers – Part 2: Equipment requirements
and tests
IEEE 802.1D Switching, GARP, GMRP, Spanning Tree
IEEE 802.1D Media access control (MAC) bridges (includes IEEE 802.1p
Priority and Dynamic Multicast Filtering, GARP, GMRP)
IEEE 802.1Q Virtual LANs (VLANs, MRP, Spanning Tree)
IEEE 802.1Q Virtual Bridged Local Area Networks (VLAN Tagging, GVRP)
IEEE 802.3 Ethernet
To Next Page
Loading...
