Bell 8084150 - Configure Your Telephone; Using the Handset Menu; Set Language; Set Date and Time

2020
Congure your telephone
Using the handset menu
1. Press MENU when the handset is not in use.
2. Press
or until the screen displays the desired
feature menu.
3. Press SELECT to enter that menu.
• To return to the previous menu, press CANCEL
on the handset
• To return to idle mode, press and hold CANCEL
on the handset
Set language
The LCD language is preset to English. You can
select English, French or Spanish to be used in all
screen displays.
1. Press MENU when the handset is not in use.
2. Press
or to choose Settings, then
press SELECT.
3. Press SELECT to select LCD language.
4. Press
or to choose English, Français or
Español, then press SELECT to save your
selection. The handset will return to the previous
menu and you will hear a conrmation tone
NOTE :
• If you accidentally changed the LCD language to
French or Spanish you can reset it to English easily by
pressing MENU and then entering
364
Set date and time
NOTE :
• Ensure you set the date and time and year correctly or
the answering system will not announce the correct day
of the week on your recorded messages time stamp
1. Press MENU when the handset is not in use.
2. Press
or to choose
Set date/time, then press SELECT.
3. Use the dialing keys (0-9) to enter the
month (MM), date (DD) and year (YY).
Then press SELECT.
4. Use the dialing keys (0-9) to enter the hour (HH)
and minute (MM). Then press
or to choose
AM or PM.
5. Press
SELECT to save the settings. You will
hear a conrmation tone. The handset will return
to the previous menu.
Home area code
If you dial your local calls using only seven digits
(area code not required) you can program your
home area code. When you receive a call from
within your local area, the telephone number will be
stored without the area code in the Caller ID log.
1. Press MENU when the handset is not in use.
2. Press
or to choose Settings, then
press SELECT.
3. Press
or to choose Home area code, then
press SELECT.
4. Use the dialing keys to enter a
three-digit home area code.
5. Press SELECT to save your selection. The
handset will return to the previous menu and you
will hear a conrmation tone.
NOTE :
• If, in the future, your telephone service provider requires
you to dial the area code when making a local call, or, if
you move to a location that requires it, delete the home
area code you have already programmed, following
the steps above. After you have deleted the home area
code, _ _ _ will appear on the display