Bell 8084150 - Delete a Call Block List Entry; Mute First Ring; Sound Settings; Key Tone

3232
NOTE:
• If you save an entry which already exists in the call
block list, the handset will display Number repeated
and return to previous screen
Delete a call block list entry
1. Search for the desired Caller ID log entry (see
Review the call block list).
2. Press DELETE. You will hear a confirmation
tone and the handset will display the next entry.
NOTE:
• If the call block list is empty after an entry is deleted,
the handset will display List empty. You will hear a
confirmation tone
Mute rst ring
Your telephone rings once for blocked calls. You
can choose to mute the rst ring for all incoming
calls, so that there will be no ring for blocked calls.
By default, the rst ring is set to ON.
1. Press MENU when the handset is not in use.
2. Press 7464# on the handset.
3. Scroll to choose First ring:On to keep the rst
ring, or First ring:Off to mute the rst ring.
4. Press SELECT to save.
NOTE:
• If you have muted the rst ring, you will hear one
ring less before the answering system and voicemail
answer the incoming calls
Sound settings
Key tone
You can turn the key tone ON or OFF for each
handset.
1. Press MENU when the handset is not in use.
2. Press
or to choose Settings, then
press SELECT.
3. Press
or to choose Key tone, then
press SELECT.
4. Press
or to choose On or Off.
5. Press SELECT to save your selection. Then the
handset will return to the previous menu and you
will hear a conrmation tone.
Ring tone
You can choose from different ring tones for each
handset.
1. Press MENU when the handset is not in use.
2. Press
or to choose Ringers, then
press SELECT.
3. Press
or to choose Home ringtone or Cell
ringtone, then press SELECT.
4. Press
or to sample each ring tone.
5. Press SELECT to save your selection. The
handset will return to the previous menu and you
will hear a conrmation tone.
NOTE:
• If you turn the ringer volume OFF you will not hear ring
tone samples
Handset ringer volume
You can set the ringer volume or turn the ringer OFF
on each handset. When the ringer is OFF will
appear on the screen.
1. Press MENU when the handset is not in use.
2. Press or to choose Ringers, then
press SELECT.
3. Press
or to select Home volume or Cell
volume, then press SELECT.
4. Press
or to sample each volume level.
5. Press SELECT to save your selection. The
handset will return to the previous menu and you
will hear a conrmation tone.
NOTE
• The ringer volume also determines the ringer volume
for intercom calls. If the ringer volume turned OFF,
that handset is silenced for all incoming calls except
paging tone