2525
• Press FIND HANDSET again on the
telephone base
-OR-
• Place the handset in the telephone base
or charger
NOTE:
• Do not press and hold FIND HANDSET for more than
four seconds. It may lead to handset and headset
deregistration.
Redial list
Each handset stores the last
10 telephone numbers dialed (up to
30 digits). When there are already
10 entries, the oldest entry is deleted to make room
for the new entry.
Review a redial list entry
1. Press REDIAL to enter the redial list.
2. Press
, or REDIAL repeatedly to browse until
the desired entry displays.
Dial a redial list entry
1. Press REDIAL to enter the redial list.
2. Press
, or REDIAL repeatedly to browse
until the desired entry displays.
3. Press
/HOME or to dial using the
home line.
-OR-
Press
/CELL to dial using the cell line.
-OR-
1. Press
/HOME or to use the home line.
-OR-
Press
/CELL to use the cell line.
2. Press REDIAL to enter the redial list.
3. Press
, or REDIAL repeatedly to browse until
the desired entry displays.
4. Press SELECT to dial the displayed number.
Delete a redial list entry
1. Press REDIAL to enter the redial list.
2. Press
, or REDIAL repeatedly to browse until
the desired entry displays.
3. When the handset displays the number you want
to delete, press DELETE.
Multiple handset use
Intercom
Use the intercom feature for conversations between
two devices.
1. Press INT on the handset when idle.
2. Your handset will show Intercom to: Use the
dialing keys to enter a device number (1-2).
The handset will show Calling HS X. The
destination handset will ring and show HS X
is calling.
4. To answer the intercom call on the destination
handset press
/HOME, /CELL, or any
dialing key (0-9,
, or ). Both handsets
now show Intercom.
-OR-
To answer the intercom call on the destination
headset press ON/OFF key on the headset.
5. To end the intercom call on either handset
press OFF or place either handset back in
the telephone base or handset charger. Both
handsets will display Intercom ended.
-OR-
Press ON/OFF key on the headset.
NOTES:
• You can cancel the intercom call before it is
answered by pressing OFF
• If the destination handset does not answer the
intercom call within 100 seconds, if it is out-of-range,
on a call, accessing the phonebook or Caller ID log
your handset will display Unable to call and return
to idle mode
• You can press OFF or MUTE on the destination
handset/headset to temporarily silence the
intercom ringer
• Only one intercom call can be established at a time
To Next Page
Loading...