2121
Dial mode
The dial mode is preset to touch-tone dialing. If
you have pulse (rotary) service, you must change
the dial mode to pulse dialing before using the
telephone to make a call.
1. Press MENU when the handset is not in use.
2. Press
or to choose Settings, then
press SELECT.
3. Press
or to choose Dial mode, then
press SELECT.
4. Press
or to choose Touch-tone or Pulse.
5. Press SELECT to save your selection. The
handset will return to the previous menu and you
will hear a conrmation tone.
Temporary tone dialing
If you have pulse (rotary) service only, you can
switch from pulse to touch-tone dialing temporarily
during a call. This is useful if you need to send
touch-tone signals to access your telephone banking
or long distance services.
1. During a call, press
.
2. Use the dialing keys to enter the number you
wish to dial.
3. The telephone sends touch-tone signals. The
telephone will automatically return to pulse
dialing mode after you end the call.
Telephone Operations
Handset control key panel:
To Next Page
Loading...