Bell 8084150 - Make a Home Call; Predial a Home Call; Answer a Home Call; End a Home Call

2222
Make a home call
1. Press /HOME or on the handset.
2. When you will hear a dial tone, dial the number.
• The handset will display Unable to call if the
telephone line is in use
NOTES:
• The handset will show the elapsed time as you talk (in
hours, minutes and seconds)
• While entering numbers, press and hold PAUSE to
insert a dialing pause
(a p will appear)
Predial a home call
1. Enter the telephone number.
2. Press
/HOME or to dial.
NOTES:
• The handset will display Unable to call if the
telephone line is in use
• The handset will show the elapsed time as you talk (in
hours, minutes and seconds)
• While entering numbers press DELETE or CANCEL to
make corrections,
press and hold PAUSE to insert a dialing pause (a p
will appear)
Answer a home call
Press /HOME, or any dialing key (0-9, , or
) to answer.
-OR-
Press ON/OFF key on the headset.
End a home call
Press OFF on the handset or place the handset in
the telephone base or handset charger.
-OR-
Press ON/OFF key on the headset.
Make a cell call
1. Press /CELL on the handset. The handset
will display Select a device.
• If you have only one cell phone connected to
the telephone base,
press SELECT to select the only device
• If you have two cell phones connected to the
telephone base, press
or to select a cell
phone and then press SELECT
2. Enter the telephone number, then press
/
CELL to dial.
• The handset will display Unable to call if
your cell phone is in use
NOTES:
• The handset will show the elapsed time as you talk (in
hours, minutes and seconds)
• While entering numbers press DELETE or CANCEL to
make corrections,
press and hold PAUSE to insert a dialing pause (a p
will appear)
• While using the cell line, place your cell phone closer
to the telephone base, and make sure that there are
no physical obstacles such as large furniture or thick
walls between the telephone base and the cell phone
Predial a cell call
1. Enter the telephone number.
2. Press
/CELL to dial.
• If you have only one cell phone connected
to the telephone base, it is automatically
selected to make cell calls
• If you have two cell phones connected to
the telephone base, the handset will display
Select a device. Press
or to select a cell
phone and then press SELECT
NOTES:
• The handset will display Unable to call if your cell
phone is in use
• The handset will show the elapsed time as you talk (in
hours, minutes and seconds)