Bell 8084150 - Limited Warranty; Technical Specifications

5050
discontinue your telephone service. The telephone service
provider is required to notify you before interrupting
service. If advance notice is not practical, you will be
notied as soon as possible. You will be given the
opportunity to correct the problem and the telephone
service provider is required to inform you of your right
to le a complaint with the FCC. Your telephone service
provider may make changes in its facilities, equipment,
operation, or procedures that could affect the proper
functioning of this product. The telephone service provider
is required to notify you if such changes are planned.
If this product is equipped with a corded or cordless
handset, it is hearing aid compatible.
If this product has memory dialing locations, you may
choose to store emergency telephone numbers (e.g.,
police, re, medical) in these locations. If you do store or
test emergency numbers, please:
Remain on the line and briey explain the reason for the call
before hanging up.
Perform such activities in off-peak hours, such as early
morning or late evening.
Industry Canada
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Privacy of communications may not be ensured when
using this phone.
The term ‘’IC:‘’ before the certication/registration
number only signies that the Industry Canada technical
specications were met.
The Ringer Equivalence Number (REN) for this terminal
equipment is 0.1. The REN indicates the maximum
number of devices allowed to be connected to a telephone
interface. The termination of an interface may consist of
any combination of devices subject only to the
requirement that the sum of the RENs of all the devices
not exceed ve.
This product meets the applicable Innovation, Science and
Economic Development Canada technical specications.
One Year Limited warranty, please check
with store associate for details.
Technical specications
Transmit
frequency
DECT frequency:
1921.536-1928.448 MHz
Bluetooth
®
frequency: 2402.000-
2480.000 MHz
Channels DECT channel: 5
Bluetooth
®
channel: 79
Nominal effective
range
Maximum power allowed by FCC
and IC. Actual operating range may
vary according to the environmental
conditions at the time of use.
Power
requirements
Handset: 2.4V Ni-MH battery
Telephone base:
Output #1:
6V DC @ 450mA;
Output #2:
6V DC @ 300mA
Charger:
6V DC @ 400mA
Memory Phonebook:
1000 memory locations (shared
between home and cell lines); up to
30 digits and 15 characters
Caller ID log:
50 memory locations;
up to 24 digits and
15 characters
Call block: 20 entries