EasyManua.ls Logo

Bell 8084150 - Technical Specifications

Bell 8084150
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4545
The cell phone
reception in my
house is poor and I
cannot connect it to
my 8084150.
If there is a location in your
house with better reception,
you can leave your cell phone
at that location while you use
the 8084150 cell line. In order
for this to work, the telephone
base must be within 15 feet of
the cell phone.
The display shows
Low battery.
Place the handset in the
telephone base or charger
for charging.
The battery does
not charge in the
handset or the
handset battery
does not
accept charge.
Make sure the handset is
placed in the telephone base
or charger correctly.
If the battery is completely
depleted, charge the battery for
at least 30 minutes before use.
You may need to purchase a
new battery.
The telephone does
not ring when there
is an incoming call.
Make sure the ringer volume is not
set to OFF.
The handset may be too far from
the telephone base. Move it
closer to the telephone base.
My handset
beeps and is not
performing normally.
Move the handset closer to the
telephone base. It may be out
of range.
I hear other
calls when using
the telephone.
Disconnect the telephone base
from the telephone wall jack. Plug
in a different telephone. If you still
hear other calls, the problem is
probably in the wiring or telephone
service. Contact your telephone
service provider.
I hear noise on the
cordless handset
and the keys do
not work.
Make sure the telephone line
cord is plugged in securely.
There is
interference
during a telephone
conversation. My
calls fade out when
I am using the
cordless handset.
The handset may be out of
range. Move it closer to the
telephone base.
If you subscribe to high-speed
Internet service (DSL-digital
subscriber line) through your
telephone line, you must install a
DSL lter between the telephone
line cord and the telephone wall
jack. The lter prevents noise and
Caller ID problems caused by
DSL interference. Contact your
DSL service provider for more
information about DSL lters.
Appliances or other cordless
telephones plugged into the
same circuit as the telephone
base can cause interference.
Try moving the appliance
or telephone base to
another outlet.
The location of your telephone
base can impact the performance
of your cordless phone. For
better reception, install the
telephone base in a centralized
location within your home
or ofce, away from walls or
other obstructions. In many
environments, elevating the
telephone base improves
overall performance.
The telephone does
not receive Caller
ID or the telephone
does not show
Caller ID during
call waiting.
Caller ID is a subscription
service. You must subscribe to
this service from your telephone
service provider for this feature to
work on your telephone.
Both your and the caller’s
telephone service providers
must use equipment compatible
with the Caller ID service.
The caller may not be calling
from an area which supports
Caller ID.
The Caller ID information
will display after the rst or
second ring.

Table of Contents