17Bend-Tech Dragon A400
Powered Gate Retrot Guide
Installation Guide
02
Note
uncluttered work area that is secure and stable, such as a sturdy workbench.
Modifying the Gate
stainless steel rollers are more durable and able to handle larger forces better than the black
steel rollers.
The Gate Bearing Plate is replaced by the Powered Gate Ring Gear. The Powered Gate Ring
Gear is driven by the C Axis Motor. When coordinated with the Chuck, this powered rotation
allows the machine to process angle and channel material.
Mounting Bolt face. The non-power Gate Mount Plate does not have the recessed Gate
Mounting Bolt face and does not allow clearance for the C Axis Homing Sensor Bolt. All other
Replacing Gate Rollers
There are four Gate Rollers in the Dragon A400 Gate assembly. Two Gate Rollers are located
on the horizontal adjustable Gate and two on the vertical adjustable Gate. Each Gate Roller
is attached to an adjustable Gate assembly by two pillow block bearings and two Allen head
screws.
Important
To Next Page
Loading...
