Safety instructions
11
TGH1394en/05.2007
– when it is in perfect condition as far as safety is concerned;
– in compliance with the accident prevention regulations and guide-
lines applicable in the location of use.
Any faults which may impair safety must be eliminated immediately.
Do not make any unauthorized changes and only use replacement
parts and optional accessories purchased from or recommended by
the manufacturer of the equipment. Failure to observe this require-
ment can result in fire, electric shock and injury.
Warning signs must always be easily legible. Damaged or illegible signs
must be replaced immediately.
2.4 Warranty and liability
Warranty and liability claims in the event of injury to persons or damage
to property are excluded if they can be attributed to one or more of the
following causes:
Non-compliant use.
Improper installation, commissioning, operation and maintenance.
Operation of equipment with faulty safety devices or safety and protec-
tive devices which have been fitted incorrectly or are not in perfect
working order.
Non-observance of instructions in this operating manual and the sup-
plement entitled "Important safety instructions for BENDER products"
in respect of transport, storage, installation, commissioning, operation
and maintenance.
Constructional changes made by parties other than the manufacturer.
Non-observance of technical data.
Repairs carried out incorrectly and the use of replacement parts or
accessories not approved by the manufacturer.
Catastrophes
Uncontrollable external factors and force majeure.
To Next Page
Loading...