Operation
49
TGH1394en/05.2007
4.Type of system
Select the type of distribution system for the system being monitored.
Configurable values: DC, AC, 3 AC.
6.6.3.2 Settings menu 2: Channel
You make the measuring channel settings in this menu (either individ-
ually or for all channels simultaneously). Selecting a measuring channel:
1. Use the "S" key to go to the measuring channel setting. Press "↵".
2. Use the UP/DOWN keys to select a single measuring channel or all
measuring channels (1…12). Press "↵" to confirm your selection.
If the measuring channel settings only differ slightly, we
recommend to proceed as follows:
- First set all the channels (1…12) to the same value.
- Then modify the settings of individual channels.
Setting
a single
Setting
all measuring channels:
Channel: 1
Exit
1.Resp.value:4mA
2.CT: W/WR
Channel: 1..12
Exit
1.Resp.value:4mA
2.CT: W/WR
measuring channel:
To Next Page
Loading...