Operation
39
TGH1394en/05.2007
6.3.5 Displaying standard information
This function is only available in EDS...-D. Press the "INFO" key. You
will now see information relating to the device and software on the
EDS...-D display. Press the "T" arrow key several times to display all the
information. Please have this information to hand if you should need to
contact us for assistance by telephone.
Line 1: Device type
Line 2: Date, time
Line 3: Address set on the BMS bus
Line 4: Software version of measurement technique
Line 5: Date of the measurement technique software version
Line 6: Communication software version
Line 7: Date of communication software version
Line 8…10: Bender address, homepage
Line 11: Exit. Exit standard information.
EDS460-D
02.01.07 14:59
Address:2
Software: D234V2.11
To Next Page
Loading...