Bender EDS460 - Settings Menu 9: Password; Settings Menu 10: Factory Settings; Settings Menu 11: Service

Operation
56
TGH1394en/05.2007
6.6.3.9 Settings menu 9: Password
Change password, activate/deactivate password.
1.Password
Change password. Factory setting: 000
2.Status
Activate or deactivate password protection.
6.6.3.10 Settings menu 10: Factory settings
Resets every setting to its factory setting. Factory settings are given in
parentheses "( )*" in the technical data.
6.6.3.11 Settings menu 11: Service
This menu is intended for Bender service employees only.
Settings can be password protected. If the password is ac-
tivated (enabled), all settings can be displayed. When an
attempt is made to change settings, the password entry
screen appears automatically:
Once a valid password has been entered, access will be
granted to settings in all menus (except the Service menu)
until menu mode is exited.
If you can't remember your password, contact the BEND-
ER Service.
Enter password:
0 0 0