Bender EDS460 - 7 Tests and Service; Periodic Tests; Maintenance; Service

63
TGH1394en/05.2007
7. Tests and service
7.1 Periodic tests
The EDS system monitors itself during operation.
We recommend that the test function is called on each connected EDS...
at regular intervals. You call a test by:
 pressing the "TEST" button on the front panel of the EDS...,
 pressing an external test button or
 calling the "TEST" function in the Control menu.
Observe the applicable national and international standards which re-
quire regular testing of electrical equipment.
7.2 Maintenance
The EDS system does not contain any parts that require maintenance.
7.3 Service
BENDER is happy to provide on-site service in respect of commissioning
and periodic testing.