Bender EDS460 - Main Menu Functions

Operation
43
TGH1394en/05.2007
6.5.3 Main menu functions
Menu item Function Page
Exit Exit menu mode -
1.Alarm/meas.
values
Displays the following for each measuring
channel:
Alarm status, test current I(ds), residual cur-
rent I(d)
44
2.History Displays the history (300 data records) with
information about messages, acknowledge-
ments and associated times. Displays the
minimum and maximum I(ds) measured
value, with address and channel.
46
3.Settings Settings for EDS... are made here. 47
4.Control This menu offers various control options,
such as TEST, RESET, etc.
57
5.External
devices
Settings on devices externally connected to
the BMS bus (e.g. EDS460-D/-L,
EDS490-D/-L).
59
6.Info Information on the device. The same display
is obtained by pressing the INFO key in the
operating mode (refer to "Displaying stand-
ard information" on page 39).
62