Operation
60
TGH1394en/05.2007
If "no access to the menu" appears, press the "ESC" key to exit the dis-
play. Possible causes are:
No device with this address available.
Connected device does not support this programming function.
Access not possible at the moment.
When the device has been recognized, the EDS...-D reads the current
settings of the connected device. The address and the device type will
be displayed in the first line.
The "External devices" menu is not suitable for program-
ming this EDS... If you otherwise try to program it, the er-
ror message "Own address" will appear.
Exit
1.Alarm/meas.values
2.Settings
2:EDS460-L
To Next Page
Loading...