Bender EDS460 - Menu 2: History

Operation
48
EDS460-490_D00085_01_M_XXEN/02.2016
6.6.2 Menu 2: History
The non-volatile history memory saves up to 300 data records (alarms, device
errors). If the history memory is full, the oldest entry will be deleted in the
event of an alarm to create space for the new entry. For details about erasing
the entire history memory refer to "Settings menu 4: History" on page 56.
Line 1: Event number (if applicable): TEST.
Line 2: Event start: Date/time
Line 3: Event acknowledgement (e.g. alarm deleted at IRDH575, MK800,
FTC4…): Date/time
Line 4: Event end: Date/time
1. If you are searching for an event that occurred at a specific time, use
the arrow buttons to scroll to the required entry.
2.
Use the " ↵ " button to call up details about the current history memory
entry.
Line 1: Event number (if applicable): TEST.
Line 2: Alarm/device error designation.
Line 3: Minimum and maximum measured value.
Line 4: Address and measuring channel of device sending the message
History no. 297
Start:
21.06.2010 / 15:57:00
Quit:
End:
21.06.2010 / 16:07:03
History no. 297
Insulation fault
Min. 2mA/Max.50mA
Addr.:2 Chan.:1
(