Operation
61
EDS460-490_D00085_01_M_XXEN/02.2016
6.6.5 Menu 5: External devices
This menu can be used for setting and operating external devices connected
via the BMS bus to this EDS…-D. In this way, settings at EDS…-L or other
EDS…-D, for example, can be carried out.
The menu items of the external devices available via this function are dis-
played on the EDS…-D. Modifications of the settings of the external device
are stored automatically in the external device.
After calling up this menu, the address and type of devices already stored will
be displayed. The display will be updated every five minutes.
Use the Up/Down buttons to set the address of the external device and con-
firm with the "↵" button.
The device is being searched:
External devices connected to the BMS bus or switched on
for the first time are displayed by the EDS…-D not until a
few minutes later in the external devices list. You don't need
to wait for the list to appear. You can select and set the
external device immediately via the address.
Exit
1.EDS460-D
2.EDS460-L
3. --
To Next Page
Loading...