Operation
62
EDS460-490_D00085_01_M_XXEN/02.2016
If "no access to the menu" appears, press the "ESC" button to exit the display.
Possible causes are:
No device with this address available.
Connected device does not support this programming function.
Access not possible at the moment.
When the device has been recognised, the EDS…-D reads the current settings
of the connected device. The address and the device type will be displayed in
the first line.
The "External devices" menu is not suitable for
programming this EDS… If you otherwise try to program it,
the error message "Own address" will appear.
Exit
1.Alarm/meas.values
2.Settings
2:EDS460-L
To Next Page
Loading...