Bender EDS460 - 7 Tests and Service; Periodic Tests; Maintenance; Service

65
EDS460-490_D00085_01_M_XXEN/02.2016
7. Tests and service
7.1 Periodic tests
The EDS system monitors itself during operation.
We recommend that the test function is called on each connected EDS… at
regular intervals. A test can be called up in the following ways:
 Select the standard display, then press and hold down the "TEST" but-
ton on the EDS… front panel for at least one second
 Press an external test button connected to the EDS…
 Send a test command via the BMS bus
 EDS…-D only: Call the "TEST" function in the Control menu
Observe the applicable national and international standards which require re-
gular testing of electrical equipment.
7.2 Maintenance
The EDS system does not contain any parts that require maintenance.
7.3 Service
Bender is happy to provide on-site service in respect of commissioning and
periodic testing.