Bender EDS460 - Settings Menu 9: Password

Operation
58
EDS460-490_D00085_01_M_XXEN/02.2016
3.Time
Set the time (e.g. 16:44).
4.CEST
Setting for automatic switchover to Central European Summer Time.
AUTO Automatic switchover
OFF No switchover (winter time is retained)
6.6.3.9 Settings menu 9: Password
Change password, activate/deactivate password.
1.Password
Change password. Factory setting: 000
2.Status
Activate or deactivate password protection.
Settings can be password protected. If the password is
activated (enabled), all settings can be displayed. When an
attempt is made to change settings, the password entry
screen appears automatically:
Once a valid password has been entered, access will be
granted to settings in all menus (except the Service menu)
until menu mode is exited.
If you can't remember your password, contact the Bender
Service.
Enter password:
0 0 0