Bender EDS460 - Settings Menu 4: History; Settings Menu 5: Language; Settings Menu 6: Interface

Operation
56
EDS460-490_D00085_01_M_XXEN/02.2016
2.Alarm
ON Relay switches in the event of an alarm.
OFF Relay does not switch in the event of an alarm.
3.Device error
on Relay switches in the event of a device error.
off Relay does not switch in the event of a device error.
4.Ext. alarm (EDS…-D only)
on Relay switches in the event of an internal alarm or an
external alarm*.
off Relay does not switch in the event of an internal alarm or an external
alarm*.
* Alarm on an external device the address of which has been set to "on" in the
"Alarm addresses" menu. (see "Settings menu 7: Alarm addresses" on page
57).
6.6.3.4 Settings menu 4: History
Here the entire history memory can be deleted. Use the "↵" button to confirm
that the memory is to be deleted.
6.6.3.5 Settings menu 5: Language
Select the language for menu and alarm texts.
Setting options: English, Deutsch or Français.
6.6.3.6 Settings menu 6: Interface
Set the BMS bus address of the EDS… .
Setting range: EDS…-D Address 1…90
EDS…-L Address 1…90