Data
75
EDS460-490_D00085_01_M_XXEN/02.2016
The response values are displayed as characteristic curves.
The maximum deviation can be +/- 50 %,including the
tolerances of the measuring current transformers. The
characteristic curves apply to the respective nominal
voltage indicated in the diagram. If the nominal voltage of
the system being monitored is different from the nominal
voltage shown in the diagram, the response values may
change proportionally. Nominal voltages changing
dynamically during operation or in case of superimposed
alternating currents that deviate from the system frequency
(e.g. caused by frequency converters) or superimposed
direct currents may result in response values that are
outside the range displayed in the diagram.
To Next Page
Loading...