Bender ISOMETER iso685-D-P User Manual

DisplayDisplay
iso685-D-P_D00170_00_M_XXDE/06.2016
40
Insulation fault location in auto mode and 1 cycle.
Insulation fault location has been started manually.
IT-System
1x
1/2
1x
Fault locationFault location
43 s
PGH ON
IT-System
1x
1/2
1x
Fault locationFault location
s
PGH ON
8.8 Initial measurement
During the initial measurement, the device records all measured values.
All measured values that may have been recorded before will be discarded if a new initial
measurement is started.
IT System
Initial
measurement
Initial
measurement
R(an) 40kΩ/10kΩ
PGH ON

Bender ISOMETER iso685-D-P Specifications

General

Brand	Bender
Model	ISOMETER iso685-D-P
Category	Measuring Instruments
Language	English