Bender ISOMETER iso685-D-P - Standards and Certifications; Ordering Details

Technical dataTechnical data
iso685-D-P_D00170_00_M_XXDE/06.2016
84
17.3 Standards and certifications
The ISOMETER® has been developed in compliance with the following standards:
• DIN EN 61557-8 (VDE 0413-8)
• IEC 61557-8
• DIN EN 61557-9 (VDE 0413-9)
• IEC 61557-9
17.4 Ordering details
* Option W: Increased shock and vibration resistance 3K5, 3M7; -40…+70 °C
Type
Supply voltage U
S
Art. No.
iso685-D-P
AC 24…240 V; 50…400 Hz
DC 24…240 V
B91067030
iso685W-D-P*
AC 24…240 V; 50…400 Hz
DC 24…240 V
B91067030W
Combination
iso685-S-P + FP200
AC 24…240 V; 50…400 Hz
DC 24…240 V
B91067230
Combination
iso685W-S-P + FP200W*
AC 24…240 V; 50…400 Hz
DC 24…240 V
B91067230W
Insulation fault locators
* Absolute values
Type
Supply voltage U
S
*
Response value Art. no.
EDS440-S-1 AC/DC 24…240V 2…10mA B 9108 0201
EDS440W-S-1 AC/DC 24…240V 2…10mA B 9108 0201W
EDS440-L-4 AC/DC 24…240V 2…10mA B 9108 0202
EDS440W-L-4 AC/DC 24…240V 2…10mA B 9108 0202W
EDS441-S-1 AC/DC 24…240V 0,2…1mA B 9108 0204
EDS441W-S-1 AC/DC 24…240V 0,2…1mA B 9108 0204W
EDS441-L-4 AC/DC 24…240V 0,2…1mA B 9108 0205
EDS441W-L-4 AC/DC 24…240V 0,2…1mA B 9108 0205W
EDS441-LAB-4 AC/DC 24…240V 0,2…1mA B 9108 0207
EDS441W-LAB-4 AC/DC 24…240V 0,2…1mA B 9108 0207W