Bennett 3000 Series - Page 33

Bennett 3000 Spec 300 Series Instruction Manual Installation Instructions
29
2 PRODUCT CONNECTION 16-FIELD WIRES REQUIRED (135046)
DIRECT PULSE OUTPUT BOARD WIRING
Wiring is to be connected directly to the Pulse Output Board.
OPTIONAL JUNCTION BOX WIRING
Wiring is to be connected to the terminal strip inside the optional junction box.
2
ND
OPTIONAL CONTROLLER
A second optional controller can be used on the RS485 channel. This is used for a Fleet System using RS485 for communication and needs
the pulse output signal for a Tank Gauge. Note: Field wiring for the second optional controller can be wired directly to the Pulse Output
Board or through the optional Junction Box. Use the tables below to determine how many wires your optional controller requires for this
type of communication.
 The second optional controller connects to the Pulse Output Board Personality Module.
 RS485 uses a 2-wire protocol.
PULSE OUTPUT BOARD CONNECTION - 2 FIELD WIRES (REQUIRED)
Continued on the next page..
Qty
Description
Size
Wire Color
To Terminal
1
(Controller) Pulse Out (+) Product 1
#18
Red
1
1
(Controller) Pulse Out (-) Product 1
#18
Blue
2
1
(Tank Gauge) Pulse Out (+) Product 1
#18
Brown
3
1
(Tank Gauge) Pulse Out (-) Product 1
#18
Pink
4
1
(Controller) Pulse Out (+) Product 2
#18
Red
5
1
(Controller) Pulse Out (-) Product 2
#18
Blue
6
1
(Tank Gauge) Pulse Out (+) Product 2
#18
Brown
7
1
(Tank Gauge) Pulse Out (-) Product 2
#18
Pink
8
1
(Source) In-Use Product 1
#18
Orange
9
1
(Signal) In-Use Product 1
#18
Yellow
10
1
(Source) In-Use Product 2
#18
Black
11
1
(Signal) In-Use Product 2
#18
White
12
1
Authorize Signal Product 1
#18
Black
13
1
Authorize Neutral Product 1
#18
White
14
1
Authorize Signal Product 2
#18
Gray
15
1
Authorize Neutral Product 2
#18
White
16
Qty
Description
Size
Wire Color
To Terminal
1
(Controller) Pulse Out (+) Product 1
#18
Red
5
1
(Controller) Pulse Out (-) Product 1
#18
Blue
6
1
(Tank Gauge) Pulse Out (+) Product 1
#18
Brown
7
1
(Tank Gauge) Pulse Out (-) Product 1
#18
Pink
8
1
(Controller) Pulse Out (+) Product 2
#18
Red
9
1
(Controller) Pulse Out (-) Product 2
#18
Blue
10
1
(Tank Gauge) Pulse Out (+) Product 2
#18
Brown
11
1
(Tank Gauge) Pulse Out (-) Product 2
#18
Pink
12
1
(Source) In-Use Product 1
#18
Orange
13
1
(Signal) In-Use Product 1
#18
Yellow
14
1
(Source) In-Use Product 2
#18
Black
15
1
(Signal) In-Use Product 2
#18
White
16
1
Authorize Signal Product 1
#18
Black
17
1
Authorize Signal Product 2
#18
Gray
18
1
Authorize Neutral Product 2
#18
White
19
Qty
Description
Size
Wire Color
To Connection
1
RS485 (+ positive)
#18
Orange
TS4, PIN 17
1
RS485 (- negative)
#18
Brown
TS4, PIN 19