BenQ LU960ST - Page 39

English
39
3. 4:3: Scales an image so that it is displayed in
the center of the screen with a 4:3 aspect
ratio. This is most suitable for 4:3 images
like computer monitors, standard denition
TV and 4:3 images aspect DVD movies, as it
displays them without aspect alteration.
4:3 picture
4. 16:9: Scales an image so that it is displayed
in the center of the screen with a 16:9
aspect ratio. This is most suitable for images
which are already in a 16:9 aspect, like high
denition TV, as it displays them without
aspect alteration.
16:9 picture
5. 16:10: Scales an image so that it is displayed
in the center of the screen with a 16:10
aspect ratio. This is most suitable for images
which are already in a 16:10 aspect, as it
displays them without aspect alteration.
16:10 picture
6. 2.4:1:Scales an image so that it is displayed
in the center of the screen with a 2.4:1
aspect ratio. This is most suitable for
widescreen cinemascope formats for movie
theaters or images which already vary to
2.40 aspect, as it displays them without
aspect alteration.
2.4:1 picture
• 2D Keystone
Press ENTER and press
▲
/
▼
/
◄
/
►
to adjust horizontal or vertical distortion brought by the
projection angle.
• Corner Fit
Press ENTER to enter the Corner Fit menu. See "Corner Fit menu" on page 40 for more
details.
• Position
Press ENTER and press
▲
/
▼
/
◄
/
►
to adjust the position of the projectored picture.
• Phase
Press
◄
/
►
to adjust Phase for the projectored picture.
• H. Size
Press
◄
/
►
to adjust H. Size for the projectored picture.
• Digital Image Resizing
Press ENTER to enter the Digital Image Resizing menu. See "Digital Image Resizing" on
page 40 for more details.
• Native Resolution
Press ENTER to enter the Native Resolution menu. See "Native Resolution" on page 41.
• Overscan
Press
◄
/
►
to hide edge of the projected image to damage the noise.
• 3D
Press ENTER to enter the 3D menu. See "3D menu" on page 42 for more details.
• Fast Mode
Press
◄
/
►
to enable or disable Fast Mode.