BenQ LU960ST - Page 61

English
61
Main menu Sub-menu Options
System Setup:
Advanced
Image Memory Save Image Memory Memory-1 / Memory-2 /
Memory-3 / Memory-4 /
Memory-5
Apply Image Memory Memory-1 / Memory-2 /
Memory-3 / Memory-4 /
Memory-5
12V Trigger On / Off
Standby Settings Standby Mode Eco/ Network / Normal
Auto Disable Network
Standby Mode
Never / 20 min / 1 hr / 3 hr /
6 hr
Audio Pass Through Off / Audio In / HDMI 1/ HDMI 2 /
DISPLAY PORT / HDBaseT
Network Settings Wired LAN Status
DHCP
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
AMX Device Discovery On / Off
Mac Address
Reset All Settings Reset / Cancel
Information Current System Status Native Resolution WUXGA 1920x1200
1080p 1920x1080
Detected Resolution
Source
Picture Mode
Light Mode
HDBaseT Connect / Disconnect
3D Format
Color System
Light Usage Time
Filter Usage Time Appears when Filter Timer On
Projector ID
Firmware Version
Service Code SN