BERGHOF DC2004 - Page 68

USER HANDBOOK 2.0 | DC20XX, ET20XX, ECC21XX SLIM
Berghof Automation GmbH | Harretstrasse 1 | 72800 Eningen | www.berghof.com
Dialog-Controller-DC20XX_EN.docx
68
 Caustic potash (potassium hydroxide) < 2 %
 Sodium hydroxide 50 %
 Refrigerant (Hysol X)
 Diesel oil
 Castor oil
 Silver nitrate 20 %
 Ethyl acetate
 Acetaldehyde
 Fluorochlorinated hydrocarbons
 Glycerine
 Isopropanol
 Methanol
 Ferric chloride< 30 %
 Formic acid (methane acid) < 50 %
 Hydrochloric acid < 10 %
 Hydrogen peroxide < 25 %
 Isophorone
 Methyl ethyl ketone (butanone)
 Nitric acid < 10 %
 Tetrahydrofuran
 Formaldehyde (37 %) in water
 Linseed oil
 Paraffin oil
 Petrol
 Silicone oil
 Turpentine substitute
 Universal brake fluid (e.g. Castrol Girling)
 Dibasic ester 6
 Skydrol 500B4
 Lixtop
 Potassium ferrocyanide
 Tetrachloro ethylene (perchloro ethylene)
 Toluene
 Triacetin
 Trichloro ethylene
 Xylene
 Phosphoric acid < 30 %
 Potash
 Sodium hypochlorite < 20 %
 Sulphuric acid < 10 %
 Detergent
 Saturated seawater solution