BERGHOF DC2004 - Uninstallation, ECC21 XX Slim

USER HANDBOOK 2.0 | DC20XX, ET20XX, ECC21XX SLIM
Berghof Automation GmbH | Harretstrasse 1 | 72800 Eningen | www.berghof.com
Dialog-Controller-DC20XX_EN.docx
72
8.2. Uninstallation, ECC21XX Slim
CAUTION
Danger of burns!
The surface of the device can become hot.
 If necessary, allow the device to cool down before uninstalling it.
Fig. 50: Uninstalling the device
1st Use the slotted screwdriver to pull the retaining spring down fully and free the device below the
mounting rail.
2nd Pull the lower device catch off the mounting rail.
3rd Push the device up and remove it from the mounting rail.